Publications

Journal Articles

40	"Significance of the micropores electro-sorption resistance in capacitive deionization systems", Yasamin Salamat, Carlos H. Hidrovo, Water Research, 2019.
39	"Dual fluorescence ratiometric technique for micromixing characterization", David C. Bedding, Carlos H. Hidrovo, Experiments in Fluids, 2018.
38	"An integrated gas-liquid droplet microfluidic platform for digital sampling and detection of airborne targets", Pooyan Tirandazi, Carlos H. Hidrovo, Sensors and Actuators B: Chemical, 2018.
37	"A parametric study of multiscale transport phenomena and performance characteristics of capacitive deionization systems", Yasamin Salamat, Carlos H. Hidrovo, Desalination, 2018.
36	"Liquid-in-gas droplet microfluidics; Experimental characterization of droplet morphology, generation frequency, and monodispersity in a flow-focusing microfluidic device", Pooyan Tirandazi, Carlos H. Hidrovo, Journal of Micromechanics and Microengineering, 2017.
35	"Performance Improvement of Capacitive Deionization for Water Desalination Using a Multistep Buffered Approach", Yasamin Salamat, Carlos A. Rios Perez, Carlos H. Hidrovo, Journal of Engergy Resources Technology, 2017.
34	"A thermophysical battery for storage-based climate control", Shankar Narayanan, Hyunho Kim, Ari Umans, Sungwoo Yang, Xiansen Li, Scott N. Schiffres, Sameer R. Rao, Ian S. McKay, Carlos A. Rios Perez, Carlos H. Hidrovo, Evelyn N. Wang, Applied Energy, 2017.
33	"Performance Characterization of a Capacitive Deionization Water Desalination System With an Intermediate Solution and Low Salinity Water", Yasamin Salamat, Carlos A. Rios Perez, Carlos H. Hidrovo, Journal of Engergy Resources Technology, 2016.
32	"Flow regime mapping of high inertial gas-liquid droplet microflows in flow focusing geometries” , Arjang Shahriari, Myeongsub Kim, Siavash Zamani, Nirmala Phillip, Babak Nosouri, Carlos H. Hidrovo, Microfluidics and Nanofluidics, 2016.
31	“Thermal Characterization of Microheated Microchannels with Spatially Resolved Two-color Fluorescence Thermometry” , Kim, T. J., Kim, M. S., Hann, S. Y., Trejo, J., and Hidrovo, C. H., Microelectromechanical Systems, Journal of 24 (1), 115-125, 2015.
30	"Development and Evaluation of a Mass Conservation Laboratory Module in a Microfluidics Environment" ,King, Andrew C. Hidrovo, Carlos H. Advances in Engineering Education, v4 n4 Sum 2015
29	“Micro- and Nano-scale Measurement Methods for Phase Change Heat Transfer on Planar and Structured Surfaces”, Buongiorno, J., Cahill, D. G., Hidrovo, C., Moghaddam, S., Schmidt, A. J. and Shi, L., Nanoscale and Microscale Thermophysical Engineering 18 (3), 2015.
28	“Capillary Flow through Rectangular Micropillar Arrays”, 3. Hale, R. S., Ranjan, R. and Hidrovo, C. H., International Journal of Heat and Mass Transfer, Vol. 75, pp. 710-717, 2014.
27	"The Improved Resistance of PDMS to Pressure-Induced Deformation and Chemical Solvent Swelling for Microfluidic Devices", 4. Kim, M., Huang, Y., Choi, K. and Hidrovo, C. H., Microelectronic Engineering, Vol. 124, pp. 66-75, 2014.
26	"Optimization of capillary flow through square micropillar arrays", Hale, R. S., Bonnecaze, R. T., and Hidrovo, C. H., International Journal of Multiphase Flow, Vol. 58, pp. 39-51, 2014.
25	"Laser Induced Fluorescence Visualization of Ion Transport in a Pseudo-Porous Capacitive Deionization Microstructure", Demirer O. N., and Hidrovo, C. H., Microfluidics and Nanofluidics, Vol. 16, pp. 109-122, 2014.
24	"Enhancement of the thermo-mechanical properties of PDMS molds for the hot embossing of PMMA microfluidic devices", Kim, M. S., Moon, B. U., and Hidrovo, C. H., Journal of Micromechanics and Microengineering, Vol. 23, pp. 095024, 2013.
23	"Humidity Effects on the Wetting Characteristics of Poly(N-isopropylacrylamide) during a Lower Critical Solution Transition", Chhabra, A. , Kanapuram, R. R. , Kim, T. J., Geng, J., da Silva, A. K., Bielawski, C. W., and Hidrovo, C. H., Langmuir, Vol. 29, No. 25, pp. 8116–8124, 2013. * These authors contributed equally
22	"Droplet Detachment Mechanism in High-Speed Gaseous Microflow", Carroll, B. and Hidrovo, C. H., Journal of Fluids Engineering, Vol. 135, No. 7, pp. 071206-1-8, 2013.
21	"Characterization of Ion Transport and –Sorption in a Carbon Based Porous Electrode for Desalination Purposes", Demirer, O. N., Clifton, R. L., Rios Perez, C. A., Naylor, R. M., and Hidrovo, C. H., Journal of Fluids Engineering, Vol. 135, No. 4, pp. 041201-8, 2013.
20	"Wind Energy Lab Module for Mechanical Engineering Undergraduate Curricula, E. Sheble, S. Bickle, C. H. Hidrovo, International Journal of Engineering Education, 2013
19	"Energetic Performance Optimization of a Capacitive Deionization System Operating with Transient Cycles and Brackish Water", Demirer, O. N., Naylor, R. M., Rios Perez, C. A., Wilkes, E., and Hidrovo, C. H., Desalination, Vol. 314, pp. 130-138, 2013.
18	"Macro Analysis of the Electro-Adsorption Process in Low Concentration NaCl Solutions for Water Desalination Applications", Rios Perez, C. A., Demirer, O. N., Clifton, R. L., Naylor, R. M., and Hidrovo, C. H., Journal of the Electrochemical Society, Vol. 160, No. 3, pp. E13-E21, 2013.
17	"Experimental Investigation of Inertial Mixing in Colliding Droplets", Carroll, B., and Hidrovo, C. H., Heat Transfer Engineering, Vol. 34, Nos. 2-3, pp. 1-12, 2013.
16	"Droplet Collision Mixing Diagnostics Using Single Fluorophore LIF", Carroll, B., and Hidrovo, C. H., Experiments in Fluids, Vol. 53, pp. 1301-1316, 2012.
15	"Pressure and Partial Wetting Effects on Superhydrophobic Friction Reduction in Microchannel Flow", Kim, T.J., and Hidrovo, C. H., Physics of Fluids, Vol. 24, 2012.
14	"Thermo-Wetting and Friction Reduction Characterization of Microtextured Superhydrophobic Surfaces", Kim, T. J., Kanapuram, R., Chhabra, A. and Hidrovo, C. H., Journal of Fluids Engineering, Vol. 134, 2012.
13	"Impact of Channel Geometry on Two-Phase Flow in Fuel Cell Microchannels", Steinbrenner, J. E., Lee, E. S., Hidrovo, C. H., Eaton, J. K. and Goodson, K. E., Journal of Power Sources, Vol. 196, No. 11, pp. 5012-5020, 2011.
12	"Neutron Radiography of Water Freezing in the Gas Diffusion Layer of a Hydrogen Fuel Cell", Gilbert, A., Hidrovo, C., Biegalski, S., and Deinert, M., Transactions of the American Nuclear Society, Vol. 101, pp. 331-332, 2009.
11	"3-D Numerical Simulation of Contact Angle Hysteresis for Microscale Two Phase Flow", Fang, C., Hidrovo, C. H., Wang, F.-M., Eaton, J. K. and Goodson, K. E., International Journal of Multiphase Flow, Volume 34, Issue 7, 2008.
10	"Investigation of Two-Phase Transport Phenomena in Microchannels Using a Microfabricated Experimental Structure", Wang, F.-M., Steinbrenner, J. E., Hidrovo, C. H., Kramer, T. A., Lee, E. S., Vigneron, S., Cheng, C.-H., Eaton, J. K. and Goodson, K. E., Applied Thermal Engineering, Volume 27, Issue 10, 2007.
9	"Measurement and Modeling of Liquid Film Thickness Evolution in Stratified Two-Phase Microchannel Flows", Steinbrenner, J. E., Hidrovo, C. H., Wang, F.-M., Lee, E. S., Vigneron, S., Kramer, T. A., Cheng, C.-H., Eaton, J. K. and Goodson, K. E., Applied Thermal Engineering, Volume 27, Issue 10, 2007.
8	"Three Dimensional Imaging of Structure and Flow – Critical to Advances in Microfluidics", Hidrovo, C. and Lundy, T., Microscopy Today, Vol. 15, No. 6, pp. 18-23, 2007.
7	"Two-Phase Microfluidics for Semiconductor Circuits and Fuel Cells", Hidrovo, C. H., Kramer, T. A., Wang, E. N., Vigneron, S., Steinbrenner, J. E., Koo, J.-M., Wang, F.-M., Fogg, D. W., Flynn, R. D., Lee, E. S., Cheng, C.-H., Kenny, T. W., Eaton, J. K. and Goodson, K. E., Heat Transfer Engineering, Volume 27, Issue 4, 2006.
6	"Advanced Cooling Technologies for Microprocessors", Kenny, T. W., Goodson, K. E., Santiago, J. G., Wang, E. N., Koo, J.-M., Jiang, L., Zhang, L., Fogg, D. W., Yao, S., Rose, K., Flynn, R., Cheng, C.-H., Hidrovo, C. H., International Journal of High Speed Electronics and Systems, Volume 16, Issue 1, 2006.
5	"A Hybrid Method for Bubble Reconstruction in Two-Phase Microchannels", Wang, E. N., Devasenathipathy, S., Lin, H., Hidrovo, C. H., Santiago, J. G., Goodson, K. E. and Kenny, T. W., Experiments in Fluids, Volume 40, Number 6, 2006.
4	"Excitation Non-Linearities in Emission Reabsorption Laser Induced Fluorescence Techniques", Hidrovo, C. H., Brau, R. R. and Hart, D. P., Applied Optics, Volume 43, Issue 4, February 2004 (journal cover).
3	"2-D Thickness and Temperature Mapping of Fluids by Means of a Two Dye Laser Induced Fluorescence Ratiometric Scheme", Hidrovo, C. H. and Hart, D. P., Journal of Flow Visualization and Image Processing, Volume 9, Issues 2&3, 2002.
2	"Spectroscopic Study on YAG(532) Laser Dyes using DELIF for Oil Film Thickness and Temperature Measurement", Saeki, S., Hart, D. P. and Hidrovo, C. H., Journal of the Visualization Society of Japan, Volume 21, Number 2 Supplement, pp. 19-20 , 2001 (in Japanese).
1	"Emission Reabsorption Laser Induced Fluorescence (ERLIF) Film Thickness Measurement", Hidrovo, C. H. and Hart, D. P., Measurement Science and Technology, Volume 12, Number 4, April 2001.

Books and Book Chapters

"Active Microfluidic Cooling Of Integrated Circuits", Hidrovo, C. H. and Goodson, K., Integrated Interconnect Technologies For 3D Nanoelectronic Systems, pp. 293-330, edited by Bakir, M. S., Meindl, J. D., Artech House, 2009.

Conference Proceedings

2016

	"Investigation of Mixing in Colliding Droplets Generated in Flow-Focusing Configurations Using Laser Induced Fluorescence", David Bedding, Carlos Hidrovo, ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting, V001T13A003
	"Generation of Uniform Liquid Droplets in a Microfluidic Chip Using a High-Speed Gaseous Microflow", Pooyan Tirandazi, Carlos H. Hidrovo, ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting, V001T03A009

"Experimental Investigation of Geometrical Parameters for Gas-Liquid Droplet Generation in Flow-Focusing Configurations", Pooyan Tirandazi, Carlos Hidrovo, ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, V001T04A070

"Performance Characterization of a Capacitive Deionization Water Desalination System With an Intermediate Solution and Low Salinity Water", Seyedehyasamin Salamat, Carlos A. Rios Perez and Carlos H. Hidrovo, ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, V001T03A013

2014

	"Transport and electrochemistry based characterization of porous electrodes for CDI applications and comparison with desalination performance”, C Rios Perez, E Wilkes, L Guitierrez, C Hidrovo, Bulletin of the American Physical Society 59, San Francisco, CA, November 23–25, 2014.
	"Fluorescence Thermometry Characterization of Microchannel Cooling Performance with Sidewall Heating”, TJ Kim, C Hidrovo, Bulletin of the American Physical Society 59, San Francisco, CA, November 23–25, 2014.

2013 & Earlier

	“A novel thermo-hydraulic test platform for micropillared array thermal wick optimization”, Miers, C., Wehmeyer, G. and Hidrovo, C. H., 10th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Rio Grande, Puerto Rico, July 8-12, 2012.
	“Characterization of Ion Transport and -Sorption in a Carbon Based Porous Electrode for Desalination Purposes”, Clifton, R.L., Naylor, R., Rios Perez, C.A. and Hidrovo, C. H., 10th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Rio Grande, Puerto Rico, July 8-12, 2012.
	“Experimental Investigation of Inertial Mixing in Droplets”, Carroll, B. and Hidrovo, C. H., 9th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Edmonton, Canada, June 19-22, 2011.
	“Thermo-Wetting and Friction Reduction Characterization of Microtextured Superhydrophobic Surfaces”, Kim, T. J., Glass, P. and Hidrovo, C. H., 8th ASME/JSME Thermal Engineering Joint Conference, Honolulu, HI, March 13-17, 2011.
	“Quantification of Inertial Droplet Collision Mixing Rates in Confined Microchannel Flows using Differential Fluorescence Measurements”, Carroll, B. and Hidrovo, C. H., 8th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, August 1-5, 2010.
	“Stability Analysis of Cassie-Baxter State under Pressure Driven Flow”, Kim, T. J. and Hidrovo, C. H., 8th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, August 1-5, 2010.
	“Characterization of Capillary Flow within a Homogeneously Dispersed Array of Vertical Micropillars”, Zhang, C. and Hidrovo, C. H., 8th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, August 1-5, 2010.
	“An Experimental Investigation of Droplet Detachment in High-speed Microchannel Air Flow”, Carroll, B. and Hidrovo, C. H., 2nd ASME Micro/Nanoscale Heat & Mass Transfer International Conference, Shanghai, China, December 18-21, 2009.
	“Superhydrophobic Friction Reduction Microtextured Surfaces”, Kim, T. J. and Hidrovo, C. H., 2nd ASME Micro/Nanoscale Heat & Mass Transfer International Conference, Shanghai, China, December 18-21, 2009.
	“Investigation of Nanopillar Wicking Capabilities for Heat Pipes Applications”, Zhang, C. and Hidrovo, C. H., 2nd ASME Micro/Nanoscale Heat & Mass Transfer International Conference, Shanghai, China, December 18-21, 2009.
	“Nanoscale Wicking Structures”, Zhang, C. and Hidrovo, C. H., 2009 ASME Summer Heat Transfer Conference, San Francisco, CA, July 19-23, 2009.
	“In-situ Neutron Radiography of Water Freezing in a GDL”, Gilbert, A., Hidrovo, C. H., Biegalski, S., Kapsimalis, R. and Deinert, M., ASME 2009 7th International Fuel Cell Science, Engineering and Technology Conference, Orange County, CA, June 8-10, 2009.
	“Flow Regime Evolution in Long Serpentine Microchannels with a Porous Carbon Paper Wall”, Steinbrenner, J.E., Lee, E.S., Wang, F.M., Fang, C., Hidrovo, C. H. and Goodson, K.E., IMECE08: ASME 2008 International Mechanical Engineering Conference, October 31-November 6, 2008.
	“Vapor-venting, Micromachined Heat Exchanger for Electronics Cooling”, David, M. P., Khurana, T., Hidrovo, C. H., Pruitt, B. L., Goodson, K. E., IMECE07: ASME 2007 International Mechanical Engineering Conference, November 11-15, 2007, Seattle, WA.
	"Gas-Liquid Flow in Microchannels Bounded by a Porous Wall", Lee, E. S., Hidrovo, C. H., Goodson, K. E. and Eaton, J. K., ICMF2007: International Conference on Multiphase Flow, July 9-13, 2007, Leipzig, Germany.
	“3-D Numerical Simulation of Contact Angle Hysteresis for Slug Flow in Microchannel”, Fang, C., Hidrovo, C., Wang, F.-M., Steinbrenner, J., Lee, E. So., Kim, D. R., Eaton, J. and Goodson, K., ICNMM2007: 5th International Conference on Nanochannels, Microchannels and Minichannels, June 18-20, 2007, Puebla, Mexico.
	“Compact Model of Slug Flow in Microchannels”, Kim, D. R., Koo, J.-M., Fang, C., Steinbrenner, J. E., Lee, E. S., Wang, F.-M., Hidrovo, C. H., Eaton, J. K. and Goodson, K. E., ICNMM2007: 5th International Conference on Nanochannels, Microchannels and Minichannels, June 18-20, 2007, Puebla, Mexico.
	“Development and Calibration of a Two-Dye Fluorescence System for Use in Two-Phase Micro Flow Thermometry”, David, M. P., Fogg, D. W., Hidrovo, C., Flynn, R. and Goodson, K. E., ITHERM 2006: Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, May 30 – June 02, 2006, San Diego, CA.
	“Flow Structures and Frictional Characteristics on Two-Phase Flow in Microchannels in PEM Fuel Cells”, Lee, E. S., Hidrovo, C. H., Steinbrenner, J. E., Wang, F.-M., Vigneron, S., Eaton, J. K. and Goodson, K. E., FEDSM2005: 2005 ASME Fluids Engineering Summer Conference, June 19-23, 2005, Houston, Texas.
	“Two-Phase Microfluidics for Semiconductor Circuits and Fuel Cells”, Hidrovo, C. H., Kramer, T. A., Wang, E. N., Vigneron, S., Steinbrenner, J. E., Koo, J.-M., Wang, F.-M., Fogg, D. W., Flynn, R. D., Lee, E. S., Cheng, C.-H., Kenny, T. W., Eaton, J. K. and Goodson, K. E., ICMM2005: 3rd International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada (keynote paper).
	“Water Slug Detachment in Two-Phase Hydrophobic Microchannel Flows”, Hidrovo, C. H., Wang, F.-M., Steinbrenner, J. E., Lee, E. S., Vigneron, S., Cheng, C.-H., Eaton, J. K. and Goodson, K. E., ICMM2005: 3rd International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada.
	“Measurement and Modeling of Liquid Film Thickness Evolution in Stratified Two-Phase Microchannel Flows”, Steinbrenner, J. E., Hidrovo, C. H., Wang, F.-M., Lee, E. S., Vigneron, S., Kramer, T. A., Cheng, C.-H., Eaton, J. K. and Goodson, K. E., Heat SET 2005: Heat Transfer in Components and Systems for Sustainable Energy Technologies, April 5-7, 2005, Grenoble, France.
	“Investigation of Two-Phase Transport Phenomena in Microchannels Using a Microfabricated Experimental Structure”, Wang, F.-M., Steinbrenner, J. E., Hidrovo, C. H., Kramer, T. A., Lee, E. S., Vigneron, S., Cheng, C.-H., Eaton, J. K. and Goodson, K. E., Heat SET 2005: Heat Transfer in Components and Systems for Sustainable Energy Technologies, April 5-7, 2005, Grenoble, France.
	“Experimental Investigation and Visualization of Two-Phase Flow and Water Transport in Microchannels”, Hidrovo, C. H., Wang, F.-M., Lee, E. S., Vigneron, S., Steinbrenner, J. E., Paidipati, J. V., Kramer, T. A., Eaton, J. K. and Goodson, K. E., IMECE04: ASME 2004 International Mechanical Engineering Conference, November 13-19, 2004, Anaheim, CA.
	“Microchannel Experimental Structure for Measuring Temperature Fields During Convective Boiling”, Kramer, T. A., Flynn, R. D., Fogg, D. W., Wang, E. N., Hidrovo, C. H., Prasher, R. S., Chau, D. S., Narasimhan, S. and Goodson, K. E., IMECE04: ASME 2004 International Mechanical Engineering Conference, November 13-19, 2004, Anaheim, CA.
	“1D Homogeneous Modeling of Microchannel Two-Phase Flow with Distributed Liquid Water Injection from Walls”, Vigneron, S., Hidrovo, C. H., Wang, F.-M., Lee, E. S., Steinbrenner, J. E., Paidipati, J. V., Kramer, T. A., Eaton, J. K. and Goodson, K. E., IMECE04: ASME 2004 International Mechanical Engineering Conference, November 13-19, 2004, Anaheim, CA.
	“Fluorescent Imaging of Void Fraction in Two-Phase Microchannels”, Fogg, D., Flynn, R., Hidrovo, C., Zhang, L. and Goodson, K., 3rd International Symposium on Two-Phase Flow Modeling and Experimentation, September 22-24, 2004, Pisa, Italy.
	“Liquid Velocity Fields in Two-Phase Microchannel Convection”, Wang, E., Devasenathipathy, S., Hidrovo, C. H., Fogg, D. W., Koo, J. M., Santiago, J. G., Goodson, K. E. and Kenny, T. W., 3rd International Symposium on Two-Phase Flow Modeling and Experimentation, September 22-24, 2004, Pisa, Italy.
	“Cognitive Microsystems: Geometry of Computation and Sensing”, Schmitt, H. A., Barker, D. L., Shah, N. N., Rosenwald, R. D., Waagen, D. E., Barbastathis, G., Jurga, S. M., Hidrovo-Chavez, C. H., Buchner, T., Streinu, L., 2004 5th Asian Control Conference, Volume 2, July 20-23, 2004, Melbourne, Australia.
	“Optical Diversity by Nanoscale Actuation”, Shih, W. C., Hidrovo, C., Kim, S. G. and Barbastathis, G., Proceedings of the 3rd IEEE Conference on Nanotechnology, August 12-14, 2003, San Francisco, CA.
	“Nanostructured Origami”, Jurga, S. M., Hidrovo, C. H., Niemczura, J., Smith, H. I. And Barbastathis, G., Proceedings of the 3rd IEEE Conference on Nanotechnology, August 12-14, 2003, San Francisco, CA.
	“2-D Thickness and Temperature Mapping of Fluids by Means of a Two Dye Laser Induced Fluorescence Ratiometric Scheme”, Hidrovo, C. H. and Hart, D. P., Proceedings of the 3rd Pacific Symposium on Flow Visualization and Image Processing, F3091, March 18-21, 2001, Maui, HI.
	“Dual Emission Laser Induced Fluorescence Technique (DELIF) for Oil Film Thickness and Temperature Measurement”, Hidrovo, C. H. and Hart, D. P., Proceedings of the ASME Fluids Engineering Division Summer Meeting 2000, FEDSM2000-11043, June 11-15, 2000, Boston, MA (earned 2001 ASME Robert T. Knapp Award).
	“Development of a Dual Purpose Visualization Technique for the Study of Rotating Shaft Seals”, Hidrovo, C. H. and Hart, D. P., Proceedings of the 3rd ASME/JSME Joint Fluids Engineering Conference, FEDSM99-7264, July 18-23, 1999, San Francisco, CA.